Description
ON / OFF Operation: touch the red or blue pad to turn the colour light ON. Touch the white pad to turn white light ON. e.g. if the white light is ON, touching the colour pad will switch white light OFF and red or blue light ON.
Dimming Operation: holding finger contact with a touch switch pad* while the light is on, for approximately 1.5 seconds will start the dimming cycle. The lamp will cycle through four dimming levels. Release finger contact at the intensity level required. Dimming starts from the previously set brightness level and increases in steps of brightness until the finger is removed from the touch switch. Once the maximum brightness is reached the lamp begins again from the lowest brightness. The lamp has a 'memory' and will always turn on at the last selected intensity level even when the power is removed from the lamp.
External Switch Control: EuroLED®Touch lamps can also be controlled via one or several external switches**. An externally wired (on)-off-(on) spring return switch will operate the lamp the same as the touch sensitive switches do. Press once to activate all lamps in colour (red or blue) or in white at the individually pre-selected level. The brightness of the lamps will be reset to a default level when the external switch is activated for more than 3 seconds. This allows multiple lamps, controlled from one or more remote switches, to synchronize all lamps to the same intensity level. Note: operation of the dimming function with an external switch will synchronise all lamps first before dimming *external switch can reset the brightness level - see external switch instructions. **momentary spring return switch(s) required eg. 1 x (on)-off-(on) switch - see wiring information